Metal core drilling
Removal
C-SC_CSSM
Version 1.0
11.02.2019
Page
43
of
88
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
8.5.2 Removing the gearbox parts
Steps that must be completed:
-
Removing the electronics
-
Removing the drill motor
-
Removing the gearbox housing
Tools:
-
Drawing-off socket cap
-
Chuck cone 24 mm
-
Combination pliers
-
Circlip pliers
-
Slide hammer
-
Inner puller
1.
Remove the seal (
1
).
2.
Remove the two straight pins (
2
).
3.
Pull off the grooved ball bearing (
3
).
4.
Remove the gear-wheel (
4
).
5.
Remove the circlip (
5
).
6.
Remove the gear-wheel (
6
).
7.
Remove the gear-wheel (
7
).
1
2
3
4
5
6
7
