Metal core drilling
Assembly
C-SC_CSSM
Version 1.0
23.01.2019
Page
54
of
75
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.1.8 Positioning the lever
Steps that must be completed:
-
Fitting the grooved ball bearings
-
Assembling the clutch and shafts
-
Assembling the lever
Tools:
-
Punch, 2 mm
-
Plastic hammer
1.
Grease the bolt (
1
).
2.
Position the bolt (
1
).
3.
Position the lever (
2
).
P
LEASE NOTE
!
Damage to the lever
The lever may be damaged if it is not positioned correctly.
When fitting the clamping sleeve (
3
), pay attention to the
position of the hole in the lever (
2
).
4.
Position the clamping sleeve.
5.
Repeat steps 1 to 4 on the opposite side of the machine.
2
1
