Grinding
34130561060
Printed in Germany
Assembly
C-SC_CSSM
Version 1.0_Template 1.0
01.12.2020
Page
69
of
84
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.7
Adjusting the support/belt run
4.
Screw in the four screws (
1
) [4.5 Nm
± 1.0 Nm
].
Information
Coat the screws with thread-locking fluid.
5.
Check by hand that the grinding belt is running in the middle
and does not rub against the housing.
Information
If the belt is not running in the middle, loosen the screw (
2
)
and turn the nut (
3
) with a wrench (10 mm) to the right or left
as necessary.
6.
Switch on the machine and check the belt run.
7.
Adjust the belt run.
Information
If the belt is not running in the middle, loosen the screw (
2
)
and turn the nut (
3
) with a wrench (10 mm) to the right or left
as necessary.
1
2
3
Photo shows similar product
