Grinding
34130561060
Printed in Germany
Assembly
C-SC_CSSM
Version 1.0_Template 1.0
01.12.2020
Page
52
of
84
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.1.3
Fitting the contact wheel
5.
Position the holder (
1
).
6.
Screw in the two screws (
2
) [1.5
±0.3 Nm
].
Information
Coat the two screws with thread-locking fluid
.
7.
Screw in the screw (
3
) with the nut.
Information
The screw with the nut will be adjusted at the end of the
fitting procedure. See the
‘Adjust the belt run’ operating
instructions.
8.
Position the holder (
4
) on the plate.
1
2
3
4
