BSS 2.0E
7. Assembly
C-SC_CSSM
Version 1.0
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
20
of
36
Assembling the eccentric shaft
1. Press the ball bearing (2) onto the eccentric shaft (1).
2. Press the bush (3) onto the eccentric shaft using the gear-wheel (4).
3. Remove the gear-wheel (4) by hand.
4. Place the feather key (5) onto the eccentric shaft.
5. Slide the cover (6) onto the eccentric shaft, as shown in the image.
6. Press the gear-wheel (5) onto the eccentric shaft.
Tool:
- Arbor press
- Sleeve with ø12mm
interior
2
1
5
6
3
5
4
