BSS 2.0E
6. Disassembly
C-SC_CSSM
Version 1.0
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
14
of
36
Disassembling the gearbox
1. Unscrew the three screws (1) and remove the adapter (2).
2. Press out the needle bearing (3).
CAUTION!
Risk of injury due to tensioned spiral spring.
Hold the plate (5) when loosening the screws (4).
3. Remove the four screws (3).
4. Remove the plate (5) and the spiral spring.
5. Remove the set screws (6) on both sides.
Tool:
- 2mm; 3mm hex key
- Pressure piece ø 11mm
- Torx T10
- Plastic mallet
1
2
6
4
5
3
