BSS 2.0E
6. Disassembly
C-SC_CSSM
Version 1.0
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
19
of
36
Disassembling the eccentric shaft
1. Remove the circlip (1).
2. Using a pull-off tool, remove the gear-wheel (2).
3. Remove the cover (3).
4. Remove the feather key (4).
5. Remove the grooved ball bearings (5) from the eccentric shaft together with the sleeve (6).
Tool:
- Circlip pliers
- 60x50mm puller
- Arbor press
- ø6.8mm pressure piece
4
5
1
2
3
6
