Microscope Assembly
5
Fein
Assemble the Condenser:
Rotate the coarse focus knob (1) to raise the
stage to its highest position.
Fully loosen the condenser lock-screw (2).
Insert the condenser into the hole of base
according to the arrowhead pointed (3), until
the condenser is aligned with the base, and
rotate the condenser to make the handle face
forward. Tighten the condenser lock-screw (2)
of condenser, then raise the condenser with the
up-down knob to the highest position.
2
Assemble the Objective:
Rotate the coarse focusing knob (1) to lower
the state to the lowest position. Then install
the objectives into the nosepiece (2) from
the lowest magnification to the highest in a
clockwise direction.
1
3
1
1
2