background image

Troubleshooting

11

Fein 

TROUBLE

POSSIBLE CAUSE

SOLUTION

Field of view is dark 

even when light is on

The field diaphragm is not large enough.

Enlarge the field diaphragm

Condenser is too low.

Adjust the position of condenser.

The edge of the field 

of view is dark or not 

even.

The nosepiece is not in the right position.

Turn the nosepiece into the right 

position.

Stain or dust has accumulated on the lens such 

as condenser, objective, or eyepiece. 

Clean the lens.

Stain or dust is 

observed in the field 

of view.

Stains have accumulated on the specimen.

Clean the specimen.

Stains have accumulated on the lens.

Clean the lens.

Glare or hot spot on 

observed image.

Condenser is set too low.

Raise condenser.

Aperture iris diaphragm is closed too much.

Open aperture iris diaphragm.

Unclear image

There’s no cover glass on the specimen.

Add the cover glass.

The cover glass is not standard.

Use a standard cover glass with 

thickness of 0.17mm.

The slide is upside down.

Adjust the slide.

The immersion oil has accumulated on the dry 

objective.

Clean the objective thoroughly.

The immersion oil is not being used for oil 

objective.

Use immersion oil.

Air bubble is in the immersion.

Get rid of the air bubbles.

The aperture diaphragm is not opened 

correctly.

Adjust the aperture diaphragm.

Stain or dust has accumulated on the eyepiece 

lens.

Clean the lens.

The condenser is too low.

Adjust the condenser.

One side of the field 

of view is dark or the 

image moves while in 

focus.

The specimen is not fixed.

Fix the specimen.

The nosepiece is not in the right position.

Turn the nosepiece into the right 

position.

Condenser centered incorrectly.

Center the condenser.

The eyes feel tired 

easily. The right 

field of view doesn’t 

superpose with the 

left.

Interpupillary distance is wrong.

Adjust the interpupillary 

distance.

Eyepieces for the left eye and right eye are 

different.

Use the same eyepiece.

Содержание RB20-HD

















Отзывы: