M46 Microscope Operation Instructions
13
Fein
Replace the fuse by first making sure the
microscope power switch is in the “O” off
position and unplug the microscope. Using a
compatible screw driver remove the screws (1)
from the fuse holder (2). Install a new fuse and
replace screws to secure fuse holder in place.
Fuse rating is 250V, 8A.
1
2
2
6
3
1
4
Install the c-mount adapter to attach a
microscope camera by loosening the lock screw
(1) and remove the dust cap (2). Remove the
two dust caps of the adapter (3). Insert the
adapter into the trinocular head and tighten
the lock screw (1). Connect the camera to
the adapter. Move the beam splitter to the
outermost position which allows the light to
travel up the trinocular tube for observation
with the camera. If the image is unclear, loosen
the lock screw (5) adjust the focusing screw (6)
until the image is clear, then tighten the lock
screw (5).