M46 Microscope Operation Instructions
10
Fein
Turn down the eyecups if the observer
is wearing glasses to prevent the glasses
touching the eyepieces and avoid
damaging the glasses and eyepieces.
Open the eyecups if the user doesn’t
wear glasses to prevent stray light from
disturbing the observation.
To adjust the stage, place the sample on
the stage and move the 5x objective into
the light path. Rotate the X-axis moving
knob (2) and the Y-axis moving knob (1)
of the stage, to move the sample to the
center position (aligned with the center
of the objective).
If the position of the sample to be
moved when the multi-sample is
observed is far from the center of the
objective lens, the platform fast-moving
function can be used. The specific
operation method is as follows: First
press and hold the clutch lever (5)
toward the handle (5), then release it,
then the handle (4) can quickly move in
both directions of the platform XY. To
turn off the fast-moving function, press
the shift speed switch button (3), reset
the clutch lever (5), and the fast moving
function stops. Mechanical platform X, Y
axis movement range is 158 x 158mm.
1
2
3
4
5