TST
Assembly instructions
LGB
FEIG ELECTRONIC GmbH
Page 4 of 26
TST_LGB_Assembly_instructions_rev5_EN.docx
Notes
Copyright 2019 by
FEIG ELECTRONIC GmbH
Lange Straße 4
D-35781 Weilburg
Tel.: +49 6471 3109 0
Version: 2020-02-13
This edition renders all previous editions invalid.
The information in this document is subject to change without notice.
The distribution, copying and utilization of this document as well as the communication of its con-
tents to others without express authorization are prohibited. Offenders are liable for the compensa-
tion of damages. All rights reserved in the event of the grant of a patent or utility model registration.
These assembly instructions are aimed specifically at the commissioning engineers of the door-line light
curtain
TST LGB
of FEIG ELECTRONIC GmbH. The installation, start-up and maintenance of the safety
device may only be completed by qualified persons in accordance with safe working procedures and as per
the instructions of the distributor of the machine (here: the door).
The distributor of the machine is solely responsible for the completeness of the operating instructions for the
machine (in this case the door). The installation instructions for the gate-line light curtain shall be supplied in
one of the languages of the European Community that is accepted by the manufacturer of the machine
where the sensor must be installed.
The assembly instruction shows only a small part of the applicable functions does not contain any warranty
of any characteristics. Advanced functions and descriptions of individual door functions are available from
the extended descriptions.
To the best of our knowledge, we believe that the accumulation of the information compiled in this document
is valid. FEIG ELECTRONIC GmbH does not warrant the accuracy or completeness of the information in this
document. FEIG ELECTRONIC GmbH will not be held liable for consequential damages arising as the result
of incorrect or incomplete information.
Since it is impossible to avoid mistakes despite our sincerest efforts, we are always grateful if these are
pointed out.
The installation recommendations provided in this document are based on favourable conditions. FEIG
ELECTRONIC GmbH assumes no responsibility for the proper operation when the unit is utilized under non-
intended conditions.
FEIG ELECTRONIC GmbH does not warrant the material described herein to be free of third party industrial
property rights. With this document, FEIG ELECTRONIC GmbH does not issue any licenses to its own or
others patent rights or industrial property rights.
Warranty claims against FEIG ELECTRONIC GmbH can only be made by the purchaser and are not trans-
ferable. FEIG ELECTRONIC GmbH’s warranty obligation extends only to products supplied by FEIG ELEC-
TRONIC GmbH. The warranty excludes any liabilities for the entire system.
The description of the products, their application, capabilities and performance shall not be considered as
warranted characteristics and are subject to technical change.
