TST
Assembly instructions
LGB
FEIG ELECTRONIC GmbH
Page 17 of 26
TST_LGB_Assembly_instructions_rev5_EN.docx
5.3 Connecting the RLGxA wiring board to the controller
The TST RLGxA wiring board is a connection distributor which facilitates the connection of the TST LGB light
curtain with the door controller. For this purpose, the red terminal block of the wiring board is plugged onto
the red pin strip of the controller board (connection for the position encoder).
The RLGxA wiring board is suitable for the following products:
Table 5: Use of the RLGxA wiring board
Product
Designation
Door controller
TST WU, TST FUZ2, TST FUxF
Light curtain
LGB
Position encoder
TST PD, TST PE [+ FSx], DES (GfA, Kostal)
ACHTUNG!
Read assembly instructions!
Observe the installation instructions of the devices used (door controller, sensors, etc.) and in particular the
safety instructions mentioned therein.
ACHTUNG!
The contacts can bend!
Remove the terminal blocks before wiring and tightening the connection screws!
31*
33*
32*
34*
35*
36*
36
A
B
75
43
73
35
34
31* 32* 33* 34* 35* 36*
7
3
A
B
3
6
1.
2.
a
b
c
b
