Feig Electronic TST FUF2 Series Скачать руководство пользователя страница 10

Страница: 10 / 114

TST

Assembly instructions

FUF2 / FU3F-A/-C/-F

FEIG ELECTRONIC GmbH

Page 10 of 114

TST_FUxF-A-C-F_Montageanleitung_EN_15

1.1 Intended use

•

The TST FUF2 controller is designed to handle electrical induction motors with a power

consumption of up to 2.2 kW and a 230 V supply. The TST FU3F controller is designed for

operation with an electrical induction motor with a power consumption of up to 5 kW at 400 V

supply. It may only be used for the operation of motor-driven doors and gates used in an

industrial or commercial context, as defined by the door product standard DIN EN 13241.

•

Intended use includes compliance with all the specifications made in this assembly manual

pertaining to assembly, installation and commissioning, the applicable safety instructions and

consideration of the technical data.

•

The controller may only be operated with accessories authorized by FEIG ELECTRONIC

GmbH.

•

All assembly, installation, commissioning and maintenance work performed on doors or

gates or on the drive units intended for the doors or gates are to be performed exclusively by

qualified specialist personnel as defined by the EC Machinery Directive. In particular, the

following regulations require compliance: VDE 0100, EN 50110, EN 60204, EN 60335 inc.

part 103, the fire protection regulations, accident prevention regulations and the applicable

regulations for industrial doors (EN12453, EN12978) and machine safety (EN ISO 13849, EN

62061).

1.2 Incorrect use

Incorrect use includes all use of the controller which is classed as non-intended use.

This device is not intended for use by persons (including children) with limited physical, sensory or

mental abilities or with a lack of experience and / or knowledge, unless they are supervised by a

person responsible for their safety or if they have received instructions on the use of the device.

Children should be supervised to ensure that they do not play with the device. Keep remote

controls away from such persons.
Should the controller be subject to any use other than that described, the operating company will

be liable for the resulting damage. This applies to unauthorised alterations, modifications or

programming to the controller and its components as well as ignoring of warnings and safety

instructions.

The following points in particular are classified as incorrect:

•

Use outside the specified assembly conditions and safety distances to the surroundings

(place and temperature).

•

Use in an explosive or easily flammable environment.

•

Use with defective parts.

•

Use with spare parts and extension boards, which have not been approved by FEIG

ELECTRONIC GmbH.

•

Use without safety devices.

Содержание TST FUF2 Series



















































































































Результаты поиска

Содержание TST FUF2 Series

Отзывы:

Бренды по названию

Популярные бренды

Feig Electronic TST FUF2 Series, Руководство по сборке

Результаты поиска

Содержание TST FUF2 Series

Отзывы:

Бренды по названию

Популярные бренды