Feig Electronic OBID i-scan RFID-Tunnel, Примечание к применению

Страница: 45 / 54

OBID i-scan
®
Application Note RFID-Tunnel
FEIG ELECTRONIC GmbH Page 45 of 54 N70101-2de-ID-B.doc
E N G L I S H
3.1.5 Reader Configuration
To tune the antennas, open the ISOStart software and first read out the current configuration of the
Reader:
Step Action Note
1
Start ISOStart Software
2
Run „Detect“...
3
...follow „New-File
Assistant“...
4
...and read out the current
Reader Configuration
Then set the operating power, Transponder Parameters and ISO Host Mode:
Step Action Note
1 Select “Configuration”
2
CFG3: RF-Interface
“RF-POWER” (here 8W)
max. 10W allowed
Select “Transponders-Drivers”
(here ISO 15693)
3
Set by clicking on “Write”
4
CFG4: Transponder
Parameters
Configure the parameters as
follows (ISO15693 Mode):
•
„Datacoding“ – 1 of 4
•
„MOD“ – 10%
•
„SUB-CARRIER“ – ASK
•
„DATA-RATE“ – High
•
„NO-TS“ – 16 Timeslot
•
„AFI“ – Disabled
5
Set by clicking on “Write”