OBID
i-
scan
®
Application-Note
ID ISC.LR(M)200
FEIG ELECTRONIC GmbH
Page 25 of 27
N11200-0e-ID-B.doc
Appendix A: Helpful tools for constructing and testing the antennas
The following equipment is recommended for tuning, troubleshooting and commissioning the an-
tennas:
•
Laptop or personal computer (PC) running under Microsoft Windows 95, 98, ME, 2000, XP.
•
Service software ISCStart (V4.02 or higher). This software can be found on the OBID® i
-scan
CD-ROM supplied by FEIG ELECTRONIC GmbH..
•
SWR and Power Meter including SMA connectors (female) or appropriate adapters.
•
Qty. 1 cable RG 58 C/U approx. 20 – 25 cm (7.8 – 9.8 in) long with two male SMA plugs (gen-
erally self-assembled).
•
Qty. 1 dummy load 50
Ω
with male SMA plugs
•
Suitable screwdriver for antenna tuning, with plastic blade, 2.4x0.5mm.
•
2-channel oscilloscope, sweep rate at least 10ns/Div or analog bandwidth of 100 MHz.
•
Qty. 2 test loops 2.5 m long (consisting of 50 Ohm, RG58 cable with BNC plug and wire loop
(diameter approx. 75 mm [3.0 in]) at the other end (generally self-assembled).
The following tools are optional but helpful:
•
HF Impedance Analyzer (for 13.56 MHz)
screen
centre conductor
BNC-plug, male
RG58 cable 2.5 m
ø 75