background image

OBID

 

 i-

scan

®

Application-Note

ID ISC.LR(M)200

FEIG ELECTRONIC GmbH

Page 2 of 27

N11200-0e-ID-B.doc

Note

 Copyright 2003 by

FEIG ELECTRONIC GmbH
Lange Strasse 4
D-35781 Weilburg-Waldhausen
Tel.: +49 6471 3109-0

http://www.feig.de

With the edition of this document, all previous editions become void. Indications made in this manual may be
changed without previous notice.

Copying of this document, and giving it to others and the use or communication of the contents thereof are
forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved
in the event of the grant of a patent or the registration of a utility model or design.

Composition of the information in this manual has been done to the best of our knowledge. FEIG
ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this
manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since,
despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.

The installation instructions given in this manual are based on advantageous boundary conditions. FEIG
ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments.

FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this
manual  and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does
not convey any license under its patent rights nor the rights of others.

OBID

®

 and OBID i-

scan

®

 are registered trademarks of FEIG ELECTRONIC GmbH.

I-CODE

®

 is a registered trademark of Philips Electronics N.V.

Tag-it

TM

 is a registered trademark of Texas Instruments Incorporated.

Содержание OBID i-scan ISC.LR200-A/B




























Отзывы: