OBID i-scan
®
Montage / Installation
ID ISC.MR200-A/E
FEIG ELECTRONIC GmbH
Page 34 of 56
M40400-4de-ID-B.doc
E N G L I S H
2
Features of the Reader Family ID ISC.MR200
2.1 Features
The ISC.MR200 is a device for contactless data exchange with common Transponder at an oper-
ating frequency of 13.56 MHz.
The ID ISC.MR200 is suitable for any application in which medium-range read distances are
required. An additional external antenna is required which must be connected to the reader.
An anti-collision function allows simultaneous reading of multiple transponders.
The Reader electronics are housed in a rigid, powder-coated aluminum enclosure with an IP54
protection rating for use outdoors. It includes two digital inputs, two digital outputs and a relay
output.
The Reader has an asynchronous RS232 interface. Depending on the Reader model you can
choose from between an additional asynchronous interface (RS485 for the ID ISC.MR200-A) and
an Ethernet interface (ID ISC.MR200-E).
The interface on the ID ISC.MR200-A can be configured for operation on a data bus with RS485
interface. The Reader address can then be software assigned.
A DC voltage can be applied to the antenna output. This voltage powers the Dynamic Antenna
Tuner (ID ISC.DAT).
2.2 Available Reader models
The following Readers are currently available:
Reader model
Description
ID ISC.MR200-A
Asynchronous interfaces RS232 and RS485
ID ISC.MR200-E
Asynchronous interface RS232 and Ethernet Interface
Table 2-1: Reader models
