Feig Electronic ID RW02.ABC-A: ID RW02.ABC-B, Руководство по установке

Страница: 15 / 18

OBID
®
Installation ID RW02.ABC
FEIG ELECTRONIC GmbH Page 15 of 18
E
N
G
L
I
S
H
5.1 Approval
When properly used this radio equipment conforms to the basic requirements of Article 3 and the
other relevant provisions of the R&TTE Directive 1999/5/E6 of March 99.
5.2 USA (FCC)
FCC ID: PJMRW02
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
CAUTION: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device is labeled with an FCC ID number.
If this label is not visible when installed in an end device, the outside of the device MUST
also display a label referring to the enclosed module.
Wording on the label similar to the following shall be used:
This device contains transmitter module FCC ID PJMRW02