Feig Electronic ID RW02.ABC-A: ID RW02.ABC-B, Руководство по установке

Страница: 14 / 18

OBID
®
Installation ID RW02.ABC
Page 14 of 18 FEIG ELECTRONIC GmbH
E
N
G
L
I
S
H
5. (
F
) Technical data
casing Plastic material ASA
colour bottom part of casing:
top of casing:
similar to RAL 9002 (greyish white)
similar to RAL 7043 (traffic grey)
weight approx. 120 g
protective system IP 54
power supply 12 - 24 V AC/DC
power consumption max. 2,5 W
temperature range -25°C to 70°C
relative air humidity 95 % (non-condensing)
antenna integrated
data transmission with transponder 125 kHz
for transponder
•
ID CTx.A
•
ID DTx.B
•
ID DTx.C
signal transmitter 1 x bicolor-LED (red, green, orange)
1 x buzzer
relay 1 x normally open
capacity of contacts: 24 V AC/DC 1,5 A
digital inputs 2 x configurable
length of lead-in wire max. 3 m
interfaces
asynchrony (bi-directional) 2400 to 38400 Baud
•
RS232 (ID RW02.ABC-A)
length of lead-in wire max. 10 m
•
RS485 (ID RW02.ABC-B)
max. 32 units on each data bus
data / clock (unidirectional) TTL
length of lead-in wire max. 3 m
•
Magnetic Stripe Emulation,
track 1 (7 Bit), track 2+3 (5 Bit)
•
Wiegand Emulation
DIP-switch 8-channel
EEPROM 10.000 writing cycles
Default values (factory alined):
asynchronous interface: 9600 Baud, 8 data- 1 stopbit, even parity
IN1 activates LED red and relay
IN2 aktivates LED green and buzzer
LED-operation control orange