OBID
®
i-
scan
Application-Note
ID ISC.ANT800/600
FEIG ELECTRONIC GmbH
Page 8 of 33
N11000-2e-ID-B.doc
1.3. Preparing the installation location / metal-free areas
To ensure flawless operation of the gate, all larger metallic parts must be removed from the vicinity
of the antennas.
Figure 2 Metal-free zone, side view
If the lower antennas are installed directly over the floor, a minimum distance of 25 cm must be
maintained.
Figure 3 Metal-free zone, view from above
50 cm
50 cm
50 cm (20 in)
50 cm (20 in)
GD
1.1 m + GD
50 cm (20 in)
50 cm
50 cm
2.50 m (8.2 ft)
2.50 m (8.2 ft)
50 cm (20 in)
