IDENTIFICATION
Installation
ID ISC.ANT1520/680-A/-B
FEIG ELECTRONIC GmbH
Page 50 of 82
ID ISC.ANT1520680-A-B User
Manual_M61112-1e-ID-E-
060317.doc
6.6 Functions of the LCD-Display
Only in the Automatic Modes (Scan, Notification or Buffered read Mode) the Display will work as
described. After power up the antenna type A or the command “System Reset” the Display will
show:
Step
Description
Display
1
Means reader is not in one
of the Automatic modes
after power up..
Please set reader to one of
the Automatic Modes.
2
Reader
IP address
and
MAC address
3
RFC Firmware Version of
Reader
Firmware Version of
Multiplexer
4
Number of connected and
detected
Gate People Counter and
LED-Controller
5
Firmware Version of each
detected GPC
6
Firmware Version of each
detected LED-Controller
7
The sum of the all counted
people on all GPC
(IN+OUT) till now.