OBID i-
scan
®
Installation
ID ISC.ANT1300/680-A/-B
FEIG ELECTRONIC GmbH
Page 36 of 45
M71104-6e-ID-B.doc
7
To verify, read AFI byte by
using the command
[0x2B] Get System
Information
4.5 Activating the Automatic Mode
The gate has to be used in one of the Automatic Modes (Buffered Read, Notification
or Scan Mode) to get a maximum performance. Otherwise the reading performance
will be significantly reduced.
For more information, see System Manual
H60700-2e-ID-B.pdf
ID ISC.LRM2000-A/B
Which mode the most suitable is for your application has to be defined in advance.
In this example it is described how to activate the Buffered Read Mode.
In the automatic modes, the tags are read at maximum speed and the information is stored in the
ring buffer of the reader. Data set can be read by the host.
Due to the automatic alarm features at the automatic mode, the reader/gate can also run without
any interface connection (Serial, Ethernet).
To activate „Buffered Read Mode“ proceed as follows:
Step
Action
Note
1
Select „Configuration“
2
Operation Mode:
„Mode“ - Buffered Read
Mode
„Data Selector“
-UID
-Antenna No
-Time
-Date
„Filter“
Set Transponder Valid
Time.
(e.g. 55 x 100ms)
3
Set clicking
on „Apply“
Note:
The configuration of the Notification or Scan Mode are similar (See System Manual of the reader)
To test the function of the Gate in the Buffered Read Mode, the BRM Window of ISOStart or the
BRMDemo program can be used.
