Feig Electronic ID ISC.ANT1300/680 Type A, Руководство по установке

Страница: 14 / 45

OBID i- scan
®
Installation ID ISC.ANT1300/680-A/-B
FEIG ELECTRONIC GmbH Page 14 of 45 M71104-6e-ID-B.doc
Transmitted
output power
Minimum Distance
< 0.5 W 1 m
0.5 W-1.0 W 2 m
1.1 W
– 2.0 W
3 m
> 2 W 4 m
>= 4 W 8 m
Table 3: Minimum Distances
-
There should be no interference of the Reader from other electrical devices in the environment.
The Noise Level difference should be less than 30 mV.
-
The ID ISC.LR2000 Reader should be set to an RF power of 5 watts.
-
When using ISO 15693 transponders, the Readers should be set as described in 4.2.6 Reader
Configuration with Power Splitter.
- If multiple gates are operated at the same time at a distance of less than 8 m, a loss of read
performance due to high interferences could happen. This could be reduced by installing a
suitable shielding.
Gate with antenna
Type A and Type B/BL
Gate distance GD

90 cm
Number of tags at traverse
speed 1 m/s
- Read serial number
- Read data
16
8
Table 4: Design notes
A minimum distance of 65cm between the two gate antennas is required.