ORIGINAL INSTRUCTIONS
14
c. Release of the chain brake
To use the chain saw again, the chain brake must be released. This must be done machine off and cooled.
Pull the shield until it returns to its original position.
d. Sharpening of the chain
For best performance, we strongly recommend that you periodically sharpen the chain. The chain can either
be sharpened by a professional or by yourself by providing you with a sharpening guide (make sure you
know how to use it).
The chain must be sharpened when:
-
Wood chips have become powder
-
To make a normal cut, force on the tool
-
The cut is not straight
-
Vibration increases
-
Fuel consumption has increased
e. Checking the lubrication of the chain
-
Before checking the oil, make sure that the bar and the chain are in place.
-
Once the engine is started, turns it at medium speed and checks that the chain oil is sprayed and traces
off the ground.
-
The oil flow of the chain is adjustable to obtain the proper flow. Insert a screwdriver on the clutch side.
-
Turn the adjuster to obtain the correct flow rate for the job.
-
The chainsaw must essentially consume the contents of the oil tank between each full of fuel. Do not
forget to fill the oil tank when filling the machine with fuel.
4. Work with wire and harness
