ORIGINAL INSTRUCTIONS
12
5. OPERATION
Before using the chainsaw, inspect the work area. This must be cleared. Remove any branches, obstacles and other
items that may cause damage during cutting.
The unit should always be filled with fuel and be usable. Check the level of filling and refill when necessary.
1. Starting the engine
a. Activate the chain brake by pushing it forward.
b. Press the priming pump continuously until the fuel enters the pump. Set the switch to position I.
c. Pull the starter button. The starter will close and the throttle will be moved to the starting position
Hold the chainsaw firmly against the ground. Put the chainsaw:
Either on the left side of your body holding the handle firmly with your left hand. Use your right hand to pull
the starter rope
Either on the right side of your body holding the handle firmly with your right hand.
Use your left hand to pull on the starter rope.
In both cases, the saw must remain away from the operator's body.
-
Push lightly the lock throttle and then the accelerator throttle to start working.
