This chipper/shredder does not have oil in the motor when shipped. Add oil
before operating the chipper/shredder, or the motor will seize.
Pic.4
Funnel installation
5. Before operating, fill the motor with oil and gas according to the instructions.
Filling the engine oil
Place the machine on a level surface and remove the oil filler cap (
Pic.5
)(5.1).
Add engine oil up to the upper level of the dipstick (
Pic.6
)(6.1).
Filling the fuel tank
The chipper/shredder is powered by a four-stroke engine, which uses unleaded gasoline
fuel. Use a suitable funnel to transfer the fuel to the engines fuel tank, taking care not to
spill any fuel or over fill the fuel tank. The fuel tank should not be filled above the top of the
fuel filter as shown in
Pic.7
