Feider Machines FSDT75, Руководство пользователя

Страница: 18 / 28

►
1. Knob bolts 2. Air cleaner cover 3. Filter 4. Breather
1.
Loosen the knob bolts.
2.
Remove the air cleaner cover.
3.
Remove the filter, clean off any dirt from the filter with a cloth or air blow. Replace the filter
with a new one if it is dam- aged or very dirty.
NOTE: The filter is a dry type and should not get wet. Never wash with water.
3.
Wipe off any oil around the breather with a rag or cloth.
4.
Install the element in the air cleaner case.
5.
Attach the air cleaner cover and tighten the knob bolts.
NOTICE: Clean the filter several times a day, if excessive dust adheres to it due to dusty
environment.
NOTICE: If operation continues with the filter remaining not cleared of oil, oil in the air
cleaner may fall outside, resulting in oil contamination.
Checking the spark plug
CAUTION: Do not touch the spark plug while the engine is running. Otherwise electrical
shock may result.
CAUTION:
Set the stop control lever/stop switch to OFF “O” position.
CAUTION: Check the spark plug cord regularly. If it is dam- aged or torn, replace it.
Otherwise electrical shock may result.
NOTICE: When removing the spark plug, clean the spark plug and cylinder head first,
so that no dirt, sand, etc will enter the cylinder.
NOTICE: Remove the spark plug after the engine has cooled down in order to avoid
damaging the threaded hole in the cylinder.
NOTICE: Install the spark plug properly into the threaded hole. If installed at an angle,
the threaded hole in the cylinder will get damaged.
1.
To open the plug cover, pull it.
►
1. Plug cover
2. Use the box wrench provided as an standard accessory to remove and install the spark
plug.
18