Feider Machines FSDT75, Руководство пользователя

Страница: 10 / 28

4. Attach long pipe 1 to the swivel pipe,Turn it clockwise to lock it in place. Then attach the
second long pipe,Turn it clockwise to lock it in place.
5. ADDING FUEL AND OIL
1) Fuel tank
WARNING: When filling the tank:
- The tool should always be stopped and cooled.
- Never smoke during refueling. It must not have flames or sparks near the fuel
- Do not attempt to refuel when the engine is hot.
- If fuel has been spilled, immediately stop refueling and do not start the engine.
Clean up the spill and fill the machine in another location.
- Do not refuel in a closed and unventilated area.
Always use unleaded with the tool, Do not use fuel containing ethanol or methanol.
Unleaded gasoline is a quality gasoline type,This will help to avoid damaging the fuel lines of the
engine and other engine parts.
a. Filling the fuel tank
- Unscrew the fuel tank cap and remove it.
- Fill the tank slowly with the mixture. Do not exceed the maximum capacity(fill to 80% of its
capacity preferably).
- Refit the cap on the fuel tank and tighten it.
- Wipe any spillage around the unit if necessary.
b.
Storage of fuel
- The fuel must be kept in a clean and safe container and always closed.
- If you are not using the product for a long time, remove the fuel and add it to a container.
- Do not leave the fuel for a long time in the product. The fuel may clog the carburetor and the
engine will not operate properly.
c.
Disposal of fuel
When the fuel is no longer used or worn, please dispose of it in an authorized location.
Check local laws regarding disposal of fuels.
2) Oil tank
- Unscrew the oil tank
- Fill the tank, Do not overfill.
- Refit the cap on the tank,Wipe any spillage if necessary.
10