Feider Machines FSDT75, Руководство пользователя

Страница: 16 / 28

►
1. Throttle trigger 2. Stop control lever
Transporting the blower
CAUTION: When transporting the blower, be sure to stop the engine.
NOTICE: Do not sit or stand on the blower nor put a heavy object on it. It may damage the
machine.
NOTICE: Maintain the blower in an upright position whenever transporting or storing.
Transporting or storing in a position that is not upright may cause oil to spill inside the blower
engine. This may result in oil leaks and white smoke from burning oil, and the air cleaner may
become dirty with oil.
NOTICE: Do not drag the blower when transporting. Otherwise the blower housing may be
damaged.
7. MAINTENANCE
CAUTION: Before inspection and maintenance, stop the engine and allow it to cool down.
Remove the spark plug and plug cap. Otherwise the operator may suffer burn or serious injury
due to an accidental start-up.
CAUTION: After inspection and maintenance, make sure that all parts are assembled.
Replacing engine oil
CAUTION: The engine main unit and engine oil still remain hot just after the engine is
stopped. When replacing engine oil, make sure that the engine main unit and engine oil are
suffi- ciently cooled down.
Otherwise, there may remain a risk of scald. Allow sufficient time
after stopping engine for the engine oil to return to the oil tank to ensure accurate reading of the
oil level indicator.
CAUTION: If the oil filled above the limit, it may become dirty or may catch fire with
white smoke.
NOTICE: Never discard replaced engine oil in garbage, ground or sewage. Disposal of oil is
regulated by law. In disposal, always follow the relevant laws and regulations. For any points
remaining unknown, contact Authorized Service Agent.
NOTICE: Oil will deteriorate even when it is kept unused. Perform inspection and
replacement at regular intervals (replace with new oil every 6 months).
Deteriorated engine oil shortens the life of the sliding and rotating parts to a great extent. Be
sure to check the period and quantity of replacement.
Interval of replacement
After first 20 operating hours, followed by every 50 operating hours
16