background image

7) If the fuel tank has to be drained, this should be done outdoors.
8) When the machine is to be stored or left unattended, lower the cutting deck.
Improper maintenance can reduce life of the tool and create accident and damages.
Always bring maintenance.
the lawnmower safety systems or features shall not be tampered with or disabled;
the operator should not alter or tamper with any sealed adjustments for the engine speed
control;
Warning: there is a danger of moving blade assemblies during adjustment;
Use the tool only for the intended use as described in manual. Misuse will create
accidents and damages.
Warning: do not use the tool while being tired, ill or under influence of alcohol or other
drugs.
The lawnmower shall not be operated without either the entire grass catcher or
self-closing discharge opening guard in place”
It misses instructions regarding exposure to noise, selection and use of hearing protection,
including recommendations for limiting the duration of operation,
Prolonged use will expose the user to vibration which can affect health. Limit the duration
of operation and wear gloves.
Warning: Do not use of the lawnmower when there is a risk of lightning;

Residual risks

Even if you use this product in compliance with all safety requirements, the potential risks
of injury and damage remain. The following hazards may arise in the structure and design
of this product:
Always be vigilant when using this product, so you can recognize and manage the risks
rather.
There are adverse health consequences resulting from the emission of vibration if the
product is used for long periods of time or not properly managed and properly maintained.
There are risks of injury and property damage due to attachments or broken the sudden
impact of hidden objects when using cutting.
Risk of injury to persons and property caused by flying objects.
Prolonged use of this product exposes the operator to vibrations and can produce
so-called "white finger" disease. To reduce the risk, wear gloves and keep your hands
warm.
If any of the symptoms of "white finger syndrome" occur, seek immediate medical
attention.
Symptoms of "white finger" include numbness, loss of sensitivity, tingling, tingling, and
pain, loss of strength, color changes or skin condition. These symptoms usually appear on
the fingers, hands or wrists. Risk increases at low temperatures.
There is a risk of loss hearing in case of prolonged use and when a hearing protection is
not worn. Wear hearing protection.

Intended use

This model of thermal mower is designed for natural grass mowing. Any other use is
prohibited.

07

Содержание FRT6224








































Отзывы: