4
c)
Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power
tools are dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts,
breakage
of parts and any other condition that may affect
the power tool’s
operation. If damaged,
have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous
situation.
a)
Have your power tool serviced by a qualified repair person using only identical
replacement parts
.
This will ensure that the safety of the power tool is maintained.
Additional Safety Instructions for finishing Sanders
a)
Wear ear protectors with sanders.
Exposure to noise can cause hearing loss.
b)
Use handles supplied with the tool.
Loss of control can cause personal injury.
c)
The dust extraction facility should always be used.
Sanding dust can be inhaled and
cause injury.
d)
Children and pregnant women must not enter the work area.
e)
Do not eat, drink or smoke in the work area.
f)
Ensure that you have removed foreign objects such as nails and screws from the
workpiece before commencing sanding.
g)
Do not continue to use worn, torn or heavily clogged sanding sheets.
Do not touch the moving sanding sheet.
Technical data
Input power
260W
Power supply
220-240V
˜, 50-60Hz
No-load Speed
N
o
:13000min
-1
Sanding pad
187×90mm
Sound pressure level
82.0dB(A), K=3 dB(A)
Sound power level
93.0dB(A), K=3 dB(A)
Vibration level
5.4m/ s
2
K=1.5 m/ s
2
5
)
Service
h)
Keep handles and grasping surfaces dry, clean and free from oil and grease
.
Slippery handles and grasping surfaces do not allow for safe handling and control of the
tool in unexpected situations.
