ORIGINAL INSTRUCTIONS
When it misses water in the boiler, a red light will show. You can still use the appliance but less
steam will come out. To fill the boiler, follow the steps as described above.
5. Storage
When you have finished your steaming tasks, follow the steps listed below:
1: Please turn the power off and unplug.
2: Press and hold steam button to release all remaining steam.
3: Allow unit to completely cool (at least 30 minutes)
4: Remove all accessories from unit.
5: Remove the boiler safety cap.
6: Drain any remaining water from the boiler. This will help to minimize mineral build-up and prevent
over-filling during your next use. Replace the boiler safety cap.
7: Store steam cleaner and accessories in a cool, dry location.
You can install the cable support on the back of unit and wind the cord on it.
6. Descaling
1: keep the steam cleaner power off.
2: Using the measuring cup, make a mixture of 250ml vinegar and 250ml of water.
3: Slowly pour the water-vinegar solution into the boiler.
4: Allow to stand for 40 minutes.
5: Drain the water-vinegar solution from the boiler.
6: Refill the fresh water to the boiler, drain, and repeat until vinegar odor disappears.
