Feider Machines FG8500RS, Инструкция по эксплуатации

Страница: 12 / 33

12
4. CONTROLS
4.1 ENGINE SWITCH
To start and stop the engine.
Switch position:
• OFF: To Stop the engine.
• ON: To run the engine after starting.
• START: To start the engine by turning the starter motor.
Turn the key to the ON position once the engine has started. Do not use the starter for more than 5
seconds at a time. If the engine does not start, release the switch and wait 10 seconds before trying
to start again.
4.2 RECOIL STARTER
To start the engine, pull the starter grip lightly until resistance is felt, then pull briskly.
NOTICE:
Do not allow the starter to snap back against the engine. Return it gently to prevent damage to
the starter.
4.3 FUEL VALVE
The fuel valve is located between the fuel tank and carburetor. When the valve lever is in the ON
position, fuel is allowed to flow from the fuel tank to the carburetor. Be sure to return the lever to OFF
after stopping the engine.
For FG8500RS
For FG8500ES