INSTALLATION OF THE MACHINE
①
stock support plate
②
protection guard 1pcs
③
back cover
④
left cover
⑤
connection
plate
⑥
right cover
⑦
fixed
⑧
Inner hexagon bolt M8
⑨
Square neck bolt M8
⑩
Inner
hexagon bolt M8
1) Install the support plate (1) on the machine by hooking the hooks under the supports provided for
this purpose.
2) Install the work plates on both sides of the machine, align the holes, put the seals and screws to
secure the parts.
3) Install the left cover (6) on the machine (it must be aligned with the holes in the worktable), and
secure with the M8 hex bolts and M8 seals.
4) Install the cover and secure with M8 hex bolts and M8 seals.
5) Install the M8 square-head bolts (9) through the left and right cover installation holes and the
connection plate and tighten the four M8 nuts.
6) Install the protective covers on the front of the unit and the rear cover on the back of the machine.
Carefully push the fasteners (7) into the installation holes of the protective covers and the rear
cover, then carefully insert the fasteners into the mounting holes in the right and left covers.
11
