GB
8
WARNING! To prevent accidental starting that could cause possible serious
personal injury, assemble all parts to your log splitter before connecting it to power
supply. Log splitter should never be connected to power supply when you are
assembling parts, making adjustment.
Carefully remove all pieces from the carton. Place the log splitter on a flat, high
work surface so that the control actuators are at least 850 mm (maximum: 1650
mm) high from the ground.
Separate and check against the list of loose parts.
WARNING!
If any parts are missing, do not operate this machine until the missing
parts are replaced. Failure to do so could result in serious personal injury.
•
Do not discard the packing materials until you have carefully inspected the log
splitter, identified all parts, and satisfactorily operated your new log splitter.
Check all loose parts from the box with the list below. Assemble according to the
instruction on the following pages.
1 horizontal leg 1pcs
2 front stand 2pcs
3 back stand 2pcs
4 horizontal shaft 2pcs
5 wheel 2pcs
6 wheel shaft 2pcs
7 wheel cover 2pcs
8 circlip 8pcs
9 Bolt M8*45 4pcs
Bolt M8*50 6pcs
10 Nut M8 4pcs
11 Flat washer 12pcs
12 Spring washer 4pcs
FEATURES
1.
Before attempting to use, familiarize yourself with all the operating
features and safety requirements of your log splitter.
