Feider Machines FC200L, Инструкция по эксплуатации

Страница: 13 / 16

11
IX. Transport and storage

Do not tilt the compressor during transport to avoid spilling the compressor oil.

Do not put objects on the compressor during transport.

The machine is heavy; it must be carried to two people for the movement or
using a lifting tool for loading.

Clean the compressor before storing it in a dry, ventilated and dust-free place.
X. Troubleshooting
Problem Causes Solutions
Motor
doesn’t
work
(1) Fuse blown, or circuit
breaker tripped
(2) Failure of electrical
connection wires
(3) Overheated motor
(4) Pressure switch fault
(5) Engine fault
(6) Tightening of the main
compressor
(1) Check, change the fuse,
switch on the circuit breaker.
(2) Check and repair
(3) Press the reset button or
wait for an automatic restart
(4) Repair or replace
(5) Check and repair
(6) Check and repair
Low pressure (1) Air leak in the safety
valve.
(2) Air filter more or less
clogged.
(3) Defectiveness in other
valves
(1) Check, repair, change if
necessary.
(2) Clean, change if
necessary
(3) Check, change if
necessary
Clamping the
main
compresso
r
(1) Moving parts overheated
due to lack of oil.
(2) Moving parts are
damaged or blocked by a
foreign object.
Check compressor components
such as crankshaft, bearing,
connecting rod, piston, piston
rings, etc., and replace if
necessary.
Presence of
trace of oil
in the air
(1) Viscosity of the oil is
not appropriate
(2) Too much oil in the
crankcase
(3) Overheated compressor
(4) Clogged air filter
(1) Change the oil, use the
non-detergent oil SAE30 or
SAE20
(2) Evacuate the overflow
(3) Readjust the control valve
and lower the pressure level
(4) Clean the air filter, change
if necessary