Feider Machines FC200L, Инструкция по эксплуатации

Страница: 12 / 16

10
- Any other condition that may affect its safe operation.
If any malfunction, damages or abnormally, do not use the tool and bring it to a
qualified service for inspection and repairs.
If the supply cord of this compressor is damaged, it must be replaced only by a
qualified service technician.
b. Maintenance Schedule
Note: The environment in which the compressor is used and the
frequency of use can affect how often you will need to check the Air
Compressor components and perform maintenance procedures.
Daily
- Make sure all nuts and bolts are tight,
- Drain moisture from air tank,
- Check for abnormal noise or vibration,
- Check for air leaks to check for air leaks, apply soapy water to joints while
the Air Compressor is pressurized. Look for air bubbles.
- Wipe off any oil or dirt from the compressor. To clean the compressor
surface, wipe with a damp cloth, using a mild detergent or mild solvent.
Draining Moisture from the Tank
It must be used daily to release all trapped air and moisture from the Tank. This
will eliminate condensation which can cause tank corrosion.
CAUTION! Do not open the Drain Valve so that more than four threads are
showing.
- Turn ON/OFF switch to the OFF position
- Place a collection pan under the drain valve.
- Unthread the drain valve two or three turns.
- When all the pressure and moisture is released, close the drain valve.
Monthly
-
Inspect Safety Valve
.
All other maintenance and repairs must be provided by our services