Fei Bao Velox, Инструкция по сборке

Страница: 38 / 64

F E I B A O V E L O X
38 38 38 38
122. Use masking tape to hold the horn and linkage at 90' to the surface
while drying.
123. You will need to run four 36" extensions on the right side of the plane,
and three on the left. The one extra is for elevator. Prepare the
extensions by tying one to your wheel collar and string, then taping the
other three extensions, one at a time, to the first extension. The
extensions need to be staggered as shown, as only one connector will fit
through the holes in the structure at a time.
124. Drop the wheel collar into the hole in the wing root, and then out into
the landing gear bay inside the fuselage, through the large upper
squarish hole in the rear main former.