Fei Bao Velox, Инструкция по сборке

Страница: 9 / 64

F E I B A O V E L O X
9 99 9
14. Assemble the clunk as shown. The provided tubing is cut to the
appropriate length at the factory. Insert the assembly into the tank
and check that the clunk goes as far back as possible into the tank,
but does not hit the back wall of the tank, even in an inverted
position. When satisfied, secure the clunk tubing at both ends
using small tie wraps or safety wire. Gently bend the vent line to
reach the top of the tank.
15. Insert the stopper and clunk assembly into the tank and tighten the
screw. Do not over tighten the screw and strip out the stopper
assembly. It only needs to be tight enough to prevent leaks. Mark
on the tank which tube is for the vent and which is for fuel. Attach
some tubing to the tank, immerse the tank into water, and blow
into the tubing to check for leaks. When satisfied, put the tank
aside.
16. Use a hand pump to extend both main landing gears.