FEHN ASSEMBLY INSTRUCTIONS
CONTINUED
FEHN ASSEMBLY INSTRUCTIONS
CONTINUED
Step 3:
seat mount
block
G
•
Install the Seat (E) through the Bronze Washer (F) and into the Seat Mount Block.
The Bronze Washer (F) should be placed above the Seat Mount Block as depicted above.
•
Once the seat is in the Seat Mount Block, insert the Quick Release Pin (G) into the lower hole
on the Seat Mount Block to secure the seat in place. DO NOT USE THE FEHN
WITHOUT INSTALLING THE QUICK RELEASE PIN PROPERLY.
•
Note:
If you need to pack or transport the seat you can move the Quick Release Pin to the
upper hole in the Seat Mount Block to prevent the seat from rotating. You should not use
the FEHN when the Pin is in the upper hole. This is for transport only.
E
IMPORTANT:
Before using the FEHN follow the Setup
Instructions on the following pages or watch the video at
www.TheFehn.com/setup to ensure the chair
is adjusted properly for your comfort and body!
F
