FeetMe Monitor, Инструкция по эксплуатации

Страница: 5 / 19

• 8 • • 9 •
8. Operating principle
FeetMe® Monitor insoles are powered by a battery and measure
pressure on the plantar surface alongisde walking parameters.
These data are calculated locally with in the insole and transmitted
by Bluetooth to the smartphone.
The FeetMe® Evaluation app can be used on a smartphone to
receive, store and view the calculated gait parameters.
9. Product setup
Setup does not require any tool other than those provided with the
device.
a. Charging the insoles with a unit charger
7. Product description
The device consists of a pair of connected insoles and an Android
application (FeetMe® Evaluation) running on a smartphone.
The mobile application is downloadable on smartphone.
•
Left
insole
Detachable parts
Double head charge cable (induction charger)
Usb wall adapter (see §15)
•
Right
insole
To charge the insoles, connect the charger to a power
outlet then position the magnetic charger head on the
area identified by a round mark. Use the wall adapter
specified in §15 (order from FeetMe if needed).
Warning
This device should not be used near other devices or
stacked above other devices as this may cause malfunction.
If this use is necessary, this unit and other devices
should be observed to ensure their normal operation.
Warning
RF portable communications devices (including peripherals
such as antenna cables and external antennas) should not be
used closer than 30 cm (12 inches) to any parts of the FeetMe
®
Monitor insoles, including cables specified by the manufacturer.
Otherwise, the performance of these devices may be impaired.
Warning
Use of accessories, transducers, and cables other than
those specified or provided by the manufacturer may cause
increased electromagnetic emissions or decreased immunity
of this equipment and therefore cause improper operation.
Warning
Any modification made to FeetMe
®
Monitor insoles and FeetMe
®
Evaluation application is forbidden.
• Portable and mobile Radio Frequency communication devices may
affect FeetMe
®
Evaluation device.
• Be careful not to puncture or cut the soles and their battery and not to
access the electronic reading circuit directly.
• Do not position the wall adapter or charging cable in a position where
the unplugging is made difficult to the user.
• Performance that could be lost or hindered by FeetMe
®
Evaluation
device due to electromagnetic interference : none.
• Appliances such as microwaves can compromise the operation of the
insoles. Be careful not to use your insoles near this type of devices.
• Do not touch the magnetic elements of the insole directly.
• Change shoes in order to use FeetMe
®
Evaluation insoles in case they
are not comfortable or fit your footwear.
• FeetMe® Evaluation insoles do not match all foot shapes.
• No special precaution is necessary in environments of use.
Warning
The device must be charged with the wall adapter reference
specified on page 13 (Technical characteristics). The use of a wall
adapter other than the specified one poses the risk of an electric
shock.