●
Reset filter: In turned on status, press and hold the power button for 5s, the filter
replacement indicator will flash 3 times then go out, which means filter usage time is
reset successfully.
Sensing mode
●
Turn on the product, it will enter sensing mode and the sensing mode indicator will
bright up.
●
When a pet comes near, it senses the pet and flows out water, the sensing mode
indicator will be constant on. When the pet goes away, the sensing mode indicator will
breathe.
*** With DC power supply, the product flows out water for 15s if no pet is sensed in
90min. No such function is provided with battery power supply.
Intermittent/constant mode
●
Under sensing mode, press the power button once, the product will enter
intermittent/constant mode.
●
Intermittent mode: With battery power supply, the product works in intermittent
mode, i.e. water flows out for 15s every 15min, and the cycle repeats itself.
●
Constant mode: With wall outlet power supply, the product works in constant mode,
i.e. water flows out constantly and the water pump works constantly. (With battery
power supply, the product only works in intermittent mode)
Power indicator
●
Breathing red indicator: low power
●
Constant red indicator: the battery is about to run out
●
Breathing green indicator: charging
●
Constant green indicator: charging completed
Filter replacement
●
When the filter replacement indicator light is on, it means the filter needs to be
replaced. After replacement, press and hold the power button for 5s in turned on status,
the filter replacement indicator will flash 3 times then go out, which means it is reset
successfully.
EN - 05
