FeelElec
FY6200
系列用户手册
11
Power On and Inspection
Connect to Power
Please use the power supply provided by the accessory to connect
to the DC power connector on the back of the signal generator. The
signal generator supports DC power of DC5V specification, and the
power consumption of the whole machine is less than 3W.
Power On
Turn on the power switch after the power cord is connected. The generator
will execute self-inspection. The LCD will show welcome interface after the
inspection is over. If the generator cannot work normally, please check the Chapter
“Fault Handing” for solution.
Set the System Language
FY6200
series Function/Arbitrary Waveform Generator supports Chinese and
English system languages. You can press
SYSTEM
→
CONF
to switch the system
language.
