FeelElec
FY6200
系列用户手册
15
Front Panel Operations
Waveform Output
FY6200 series can output waveforms (Sine, Square, Triangle/Ramp, Pulse and
Noise etc.) from one of the channels separately or from the two channels at the
same time. At start-up, the dual channels are configured to output a sine waveform
with 10kHz frequency and 5Vpp amplitude by default. Two channels use default
setting saved at Position 1 when power on. Users can configure the instrument to
output various waveforms.
Select Output Channel
CH1
、
CH2
keys are used to switch ch1 or CH2 to the currently selected
channel. When power on, ch1 is selected by default and displayed in yellow on the
top half of the screen. Press the CH2 key on the front panel to select CH2, which
is displayed in blue on the top half of the screen. After selecting the required output
channel, you can configure the waveform and parameters of the selected channel.
KEY POINT:
CH1 and CH2 can not be selected at the same time. Users can first select CH1 and
then select CH2 after configuring the waveform and parameters of CH1. If you need
to change the parameters of two channel at same time, please refer to Chapter
“Synchronizing”.
