E3980 VRSS
12
7.4
INSTALLATION FOR JOINED CASES (LINEUPS)
7.4.1
Join refrigerated to refrigerated
1.
Remove all Shelves, display deck, interior back panel(s), exterior back(s),
front and rear base panel, and loosen honeycomb (see cleaning section for
honeycomb removal) material on the unfinished end to expose the holes used
to bolt units together.
2.
Position the right or leftmost unit in the desired position for the lineup to start,
and level this case.
3.
Push the 2
nd
case next to the 1
st
and line them up as closely as possible.
4.
Adjust the leveling legs of the 2
nd
case until the units and joining holes align
with each other.
5.
Using (7) holes noted below, bolt units together with the supplied hardware,
and attach joining trim to remove the gap between the decks in the joined
units. Re-use the screws in the uprights, and use the
JOINING HOLES
