Federal Signal Corporation SpectraLux SIFZ Front ILS Скачать руководство пользователя страница 19

Страница: 19 / 20

Installation, Maintenance, and Service Manual

Federal Signal

www.fedsig.com

Getting Technical Support and Service

For technical support and service, please contact:

Service Department

Federal Signal Corporation

Phone: 1-800-433-9132

Email: [email protected]

www.fedsig.com

Getting Repair Service

The Federal Signal factory provides technical assistance with any problems that cannot

be handled locally.

Any units returned to Federal Signal for service, inspection, or repair must be

accompanied by a Return Material Authorization (RMA). Obtain a RMA from a local

Distributor or Manufacturer’s Representative.

Provide a brief explanation of the service requested, or the nature of the malfunction.

Address all communications and shipments to the following:

Federal Signal Corporation

Service Department

2645 Federal Signal Drive
University Park, IL 60484-3167

Ordering Replacement Parts

This section contains a partial list of replacement parts. To order replacement parts, call

the Federal Signal Service Department at 1-800-433-9132 or 1-708-534-3400, 7 a.m. to 5

p.m., Monday through Friday (Central Time) or contact your nearest distributor.

Table 5 Replacement parts

Description

Part Number

PCB Assembly End (Configured)

Contact Factory

PCB Assembly, Front (Configured)

Contact Factory

PCB Assembly, Rear (Configured)

Contact Factory

PCB Assembly, Controller (Configured)

Contact Factory

Nut, 1/4-20, Barrel

7065071

Seal, Lip, Lens

8651116

O-Ring, Lens Nut

7067016

Gasket, Lens

8651125

Lens, Clear, 44

8651101

Lens, Clear, 51

8651103

Содержание SpectraLux SIFZ Front ILS




















Результаты поиска

Содержание SpectraLux SIFZ Front ILS

Отзывы:

Бренды по названию

Популярные бренды

Federal Signal Corporation SpectraLux SIFZ Front ILS, Инструкция по установке, обслуживанию и ремонту

Результаты поиска

Содержание SpectraLux SIFZ Front ILS

Отзывы:

Бренды по названию

Популярные бренды