Setting Control Head Options
45
Installation and Maintenance Instructions
Federal Signal www.fedsig.com
Figure 26 Keep-Alive Timeout durations
Resetting the Control Head to the Factory Default Configuration
To reset the operation and control of network devices to the factory default:
1. While in Program Mode, press Button 7. See Figure 25 on page 43.
2. To continue, select another setting to change or press Button 13 to exit Program
Mode. Verify that the last amber LED turns on when you exit.
Exiting Program Mode
To exit Program Mode
1. Press Button 13. See Figure 25 on page 43.
2. Verify that the last amber LED turns on when you exit.
