SmartSiren Platinum Convergence Network
Federal Signal www.fedsig.com
Connecting the Convergence Network
28
Speaker Connections (Cable Assembly P/N 17500307)
The SSP2000B siren amplifier operates with one 11 ohm impedance, 100 W
speaker.
The SSP3000B is designed to operate with one or two 11 ohm impedance, 100 W
speakers. Software-configurable options include a variety of siren tones, horn ring
transfer, slide switch operation, and siren activation or siren mute.
WIRING PRECAUTION: Do not connect the brown zip cord wires to the
speaker. Failure to follow this precaution may damage the speaker system.
To connect one speaker:
1. Use 18 AWG wire to connect one speaker lead to the blue lead from the cable
assembly.
2. Use 18 AWG wire to connect the other speaker lead to the single brown lead
from the cable assembly.
To connect two speakers (SSP3000B only):
Connect the speakers in parallel and in phase to the blue lead and the single
brown lead from the cable assembly. When finished, insulate spliced leads with
twist-on wire connectors. Fold and seal unused leads.
Figure 12 Connections for two speakers
100 W
200 W
Blue 18 AWG
Brown 18 AWG
(SSP3000B ONLY)
Radio
Ring
Spkr
Radio
Horn
Spkr
290A7815
10 8 6 4 2
9
5
7
3 1
AUX
2 3
3
4
4
5 6 7 8
1
11 1 1 1 1
2
2 3 4
AUX
PARK
INPUT
+12V
+
P
SERIAL PORTS
RADIO
RING
SPKR
DO NOT EXCEED 5 AMPS
MAXIMUM ON HORN RING
CIRCUIT. SEE INSTALLATION
INSTRUCTIONS
RADIO
RING
SPKR
