Federal Signal Corporation Smart Siren, Руководство по установке и обслуживанию

Страница: 48 / 52

Chapter 9: Servicing the PA300-CN
48
PA300-CN Siren Amplifier
Reinstalling the Control Pad
To reinstall the control pad in the vehicle:
1. Reconnect the cables and wiring to the control pad.
2 . See Figure 9.2 on page 46. Secure the rear mounting bracket to the control pad base with the two
Phillips #6-32 x 1/4" screws.
3. See Figure 9.1 on page 46. Secure the rear mounting bracket to the mounting surface bracket with
the two 1/4" external-tooth lock washers and 1/4-20 x 3/4" hinge screws.)
Getting Technical Support and Service
Federal Signal Corporation will service your equipment or provide technical assistance with any problems
that cannot be handled locally. Any product returned to Federal Signal for service, inspection, or repair must
be accompanied by a Return Material Authorization number. The RMA number can be obtained from your
local distributor or Federal Signal. Please provide a brief explanation of the service requested or the nature of
the malfunction. Contact your local dealer/distributor for replacement parts availability or contact the Federal
Signal Service Department (7 a.m. to 5 p.m., Monday through Friday, Central Time) at:
Service Department
Federal Signal Corporation
2645 Federal Signal Drive
University Park, IL 60484-3167
800-433-9132
800-343-9706 (fax)
www.fedsig.com
Ordering Replacement Parts
See Table 9.2 below and Table 9.3 and Figure 9.4 on page 49.
To order replacement parts, please contact:
Customer Support
Federal Signal Corporation
Phone: 1-800-264-3578
Table 9.2 Control pad replacement parts
Description Part Number
Slide Switch Assy., Control Pad 122290-01
Bezel, Slide Switch 8573060
Knob, Aluminum, Slide Switch 85361185
Screw, #4-40 x 0.375
"
, Flat Hd.,
Phil., Slide Switch Bezel
7000259-06